Tag Archives: motor reducer gearbox

China Standard 380V Cast Alu Helical Gear Reducer Three Phase AC Motor Gearbox Nmrv75 car gearbox

Product Description

Product Description

Model No.: NMRV/NRV571, 030, 040, 050, 063, 075, 090, 110, 130
Reduction gear, worm gear, gear reducer
Reduction gear

Features:
1) High quality aluminum alloy die cast gearbox
2) High accuracy worm gear and worm shaft
3) Less noise and lower temperature increase
4) Easy mounting and linking, high efficiency
5) Power: 0.06 – 15kW
6) Output torque: 2.7 – 1, 760Nm
7) Transmission rate: 5 – 100
Inner packing: Carton Outer packing: Wooden case
Reduction gear, worm gear, gear reducer

  model   PAM IEC   N   M P   7.5D   10D   15D   20D   25D   30D   40D   50D 60D    80D
  NMRV030   63B5   95   115   140   11   11   11   11   11   11   11   /   /   /
  NMRV030   63B14   60   75   90   11   11   11   11   11   11   11   /   /   /
  NMRV030   56B5   80   100   120   9   9   9   9   9   9   9   9   9   9
  NMRV030   56B14   50   65   80   9   9   9   9   9   9   9   9   9   9
  NMRV040   71B5   110   130   160   14   14   14   14   14   14   14   /   /   /
  NMRV040 71B14    70   85   105   14   14   14   14   14   14   14   /   /   /
  NMRV040   63B5   95   115   140   11   11   11   11   11   11   11   11 11    11
  NMRV040   63B14   60   75   90   11   11   11   11   11   11   11 11    11   11
  NRMV050   90B5   130   165   200   19   19   19   19   19   /   /   /   /   /
  NRMV050   80B14   80   100   120   19   19   19   19   19   /   /   /   /   /
  NRMV050   71B5   110   130   160   14   14   14   14 14    14     14   14   14   14
  NRMV050   71B14   70   85   105   14   14   14   14   14   14   14   14   14   14
  NMRV063   90B5   130   165   200   24   24   24   24   24   24   /   /   /   /
    NMRV063   90B14   95   115   140   24   24   24   24   24   24   /   /   /   /
    NMRV063   80B5   130   165   200   19   19   19   19   19   19   19   19   /   /
    NMRV063   80B14   80   100   120   19   19   19   19   19   19   19   19   /   /
  NRMV075   100/112B5   180   215   250   28   28   28   /   /   /   /   /   /   /
  NRMV075   100/112B14   110   130   160   28   28   28   /   /   /   /   /   /   /
  NRMV075   90B5   130   165   200   24   24   24   24   24   24   24   /   /   /
  NRMV075   90B14   95   115   140   24   24   24   24   24   24   24   /   /   /
  NMRV090   100/112B5   180   215   250   /   /   /   /   24   24   24   24   24   24
    NMRV090   100/112B14   110   130   160   /   /   /   /   24   24   24   24   24   24
    NMRV090   90B5   130   165   200   /   /   /   /   /   /   /   19   19   19
    NMRV090   90B14   95   115   140   /   /   /   /   /   /   /   19   19   19

Ms series aluminum housing three-phase asynchronous motors, with latest design in entirety, are made of selected quality materials and conform to the IEC standard.

MS series motor have good performance, safety and reliable operation, nice appearance, and can be maintained very conveniently, while with low noises, little vibration and at the same time light weight and simple construction. These series motors can be used for general drive.
OPERATING CONDITIONS
Ambient temperature: -15° C<0<40° C
Altitude: Not exceed 1000m.
Rated voltage: 380V, 220V~760V is available.
Rated frequency: 50Hz/60Hz
Duty/Rating: S1(Continuous)
Insulation class: F
Protection class: IP54
Cooling method: IC0141

Model Rated power Current Power factor Efficiency speed Locked Rotor
 torque
Locked Rot or Current Breakdown Torque
Type (KW) (A) (cosΦ) (η%) (r/min) Tst
TN
Ist
TN
Tmax
TN
synchronous speed 3000r/min(380V 50HZ)
MS561-2 0.09 0.29 0.77 62 2750 2.2 5.2 2.1
MS562-2 0.12 0.37 0.78 64 2750 2.2 5.2 2.1
MS631-2 0.18 0.53 0.8 65 2780 2.3 5.5 2.3
MS632-2 0.25 0.69 0.81 68 2780 2.3 5.5 2.3
MS711-2 0.37 1.01 0.81 69 2800 2.2 6.1 2.3
MS712-2 0.55 1.38 0.82 74 2800 2.3 6.1 2.3
MS801-2 0.75 1.77 0.83 75 2825 2.3 6.1 2.2
MS802-2 1.1 2.46 0.84 76.2 2825 2.3 6.9 2.2
MS90S-2 1.5 3.46 0.84 78.5 2840 2.3 7.0  2.2
MS90L-2 2.2 4.85 0.85 81 2840 2.3 7.0  2.2
MS100L-2 3 6.34 0.87 82.6 2880 2.3 7.5 2.2
MS112M-2 4 8.20  0.88 84.2 2890 2.3 7.5 2.2
MS132S1-2 5.5 11.1 0.88 85.7 2900 2.3 7.5 2.2
MS132S2-2 7.5 14.9 0.88 87 2900 2.3 7.5 2.2
MS160M1-2 11 21.2 0.89 88.4 2947 2.3 7.5 2.2
MS160M2-2 15 28.6 0.89 89.4 2947 2.3 7.5 2.2
MS160L-2 18.5 34.7 0.90  90 2947 2.3 7.5 2.2
synchronous speed 1500 r/min(380V 50HZ)
MS561-4 0.06 0.23 0.70  56 1300 2.1 4.0  2.0 
MS562-4 0.09 0.33 0.72 58 1300 2.1 4.0  2.0 
MS631-4 0.12 0.44 0.72 57 1330 2.2 4.4 2.1
MS632-4 0.18 0.62 0.73 60 1330 2.2 4.4 2.1
MS711-4 0.25 0.79 0.74 65 1360 2.2 5.2 2.1
MS712-4 0.37 1.12 0.75 67 1360 2.2 5.2 2.1
MS801-4 0.55 1.52 0.75 71 1380 2.3 5.2 2.4
MS802-4 0.75 1.95 0.76 73 1380 2.3 6.0  2.3
MS90S-4 1.1 2.85 0.77 76.2 1390 2.3 6.0  2.3
MS90L-4 1.5 3.72 0.78 78.2 1390 2.3 6.0  2.3
MS100L1-4 2.2 5.09 0.81 81 1410 2.3 7.0  2.3
MS100L2-4 3 6.78 0.82 82.6 1410 2.3 7.0  2.3
MS112M-4 4 8.8 0.82 84.6 1435 2.3 7.0  2.3
MS132S1-4 5.5 11.7 0.83 85.7 1445 2.3 7.0  2.3
MS132S2-4 7.5 15.6 0.84 87 1445 2.3 7.0  2.3
MS160M-4 11 22.5 0.84 88.4 1460 2.2 7.0  2.3
MS160L-4 15 30.0  0.85 89.4 1460 2.2 7.5 2.3
                 
Model Rated power Current Power factor Efficiency speed Locked Rotor
 torque
Locked Rot or Current Breakdown Torque
Type (KW) (A) (cosΦ) (η%) (r/min) Tst
TN
Ist
TN
Tmax
TN
synchronous speed 1000 r/min(380V 50HZ)
MS711-6 0.18 0.74 0.66 56 900 2.0  4.0  1.9
MS712-6 0.25 0.95 0.68 59 900 2.0  4.0  1.9
MS801-6 0.37 1.23 0.70  62 900 2.0  4.7 1.8
MS802-6 0.55 1.70  0.72 65 900 2.1 4.7 1.8
MS90S-6 0.75 2.29 0.72 69 900 2.1 5.3 2.0 
MS90L-6 1.1 3.18 0.73 72 910 2.1 5.5 2.0 
MS100L-6 1.5 4.0  0.76 76 910 2.1 5.5 2.0 
MS112M-6 2.2 5.6 0.76 79 940 2.1 6.5 2.0 
MS132S-6 3 7.40  0.76 81 940 2.1 6.5 2.1
MS132M1-6 4 9.5 0.76 82 960 2.1 6.5 2.1
MS132M2-6 5.5 12.6 0.77 84 960 2.1 6.5 2.1
MS160M-6 7.5 17.2 0.77 86 960 2.0  6.5 2.1
MS160L-6 11 24.5 0.78 87.5 960 2.0  6.5 2.1
synchronous speed 750 r/min(380V 50HZ)
MS801-8 0.18 0.83 0.61 51 630 1.9 3.3 1.8
MS802-8 0.25 1.10  0.61 54 640 1.9 3.3 1.8
MS90S-8 0.37 1.49 0.61 62 660 1.9 4.0  1.8
MS90L-8 0.55 2.17 0.61 63 660 2.0  4.0  1.8
MS100L1-8 0.75 2.43 0.67 70 690 2.0  4.0  1.8
MS100L2-8 1.1 3.36 0.69 72 690 2.0  5.0  1.8
MS112M-8 1.5 4.40  0.70  74 680 2.0  5.0  1.8
MS132S-8 2.2 6.00  0.71 79 710 2.0  6.5 1.8
MS132M-8 3 7.80  0.73 80 710 2.0  6.5 1.8
MS160M1-8 4 10.3 0.73 81 720 2.0  6.6  2.0 
MS160M2-8 5.5 13.6 0.74 83 720 2.0  6.6  2.0 
MS160L-8 7.5 17.8 0.75 85.5 720 2.0  6.6 2.0 

Detailed Photos

Our Advantages

We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price 
What we do:
1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting – both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting – both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,

FAQ

Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial, Household Appliances, Power Tools
Operating Speed: Constant Speed
Number of Stator: Three-Phase
Species: Y, Y2 Series Three-Phase
Rotor Structure: Squirrel-Cage
Casing Protection: Protection Type
Samples:
US$ 119/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Common Problems with Gearboxes and How to Troubleshoot Them

Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:

  1. Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
  2. Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
  3. Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
  4. Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
  5. Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
  6. Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
  7. Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
  8. Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
  9. Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
  10. Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.

Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.

China Standard 380V Cast Alu Helical Gear Reducer Three Phase AC Motor Gearbox Nmrv75   car gearbox	China Standard 380V Cast Alu Helical Gear Reducer Three Phase AC Motor Gearbox Nmrv75   car gearbox
editor by CX 2024-05-14

China OEM 3 Phase 200 Ratio Three Phase Medium Motor Reduction Gearbox for Electric Motor Gear Reducer gearbox drive shaft

Product Description

3 Phase AC Reducer Motor 1/2hp 220V 380V 400W Gear Precision Foot Mounted Reducer Motor

CV and CH series motor can be designed as Single phase and 3 phases type. And power range is from 0.1KW to 3.7KW. The motor can be mounted with brake, and brake type is No excitation type. Material of gears is advanced special alloy steel and all gears are carburizing hardening. This gear motor has been added with senior lubricants, and no needs to added lubricants again.

Helical gear reducer has the characteristics of strong versatility, good combination, and strong bearing capacity, and has the advantages of easy access to various transmission ratios, high efficiency, small vibration, and high allowable axial and radial loads.

This series of products can not only be used in combination with various reducers and vibrators to meet the requirements, but also has the advantage of localization of related transmission equipment.
 

Mostly used in metallurgy, sewage treatment,chemical, pharmaceutical and other industries.

 

Type CH series  three phase or single phase ac motors for industrial use 
Voltage 220VAC, 380VAC, 415VAC
Power range Power range is 0.1KW to 3.7KW
Output Speed Speed range is from 7rpm to 500rpm
Phase Single phase and 3phases for choice
Gears Special alloy steel and high precise gears
Grease Good grease and no need add grease during using
Cooling Full closed fan
USE This motor is widely used in
packing machine, textil machine
motor is widely used in mix 
machine,elevator, conveyor,etc.
OEM Service We offer OEM service.

  

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Three-Step
Samples:
US$ 70/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Common Problems with Gearboxes and How to Troubleshoot Them

Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:

  1. Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
  2. Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
  3. Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
  4. Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
  5. Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
  6. Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
  7. Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
  8. Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
  9. Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
  10. Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.

Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.

China OEM 3 Phase 200 Ratio Three Phase Medium Motor Reduction Gearbox for Electric Motor Gear Reducer   gearbox drive shaft	China OEM 3 Phase 200 Ratio Three Phase Medium Motor Reduction Gearbox for Electric Motor Gear Reducer   gearbox drive shaft
editor by CX 2024-04-29

China Standard High Precision Motor Reductor Hollow Shaft Speed Reducer Rotary Flange Output Type Planetary Gearbox Padr Series best automatic gearbox

Product Description

Product Description

 

Rotary speed reducer/slewing drive

Main fetures:

1.large speed ratio range

2.small volume,low weight ,saving space for mounting.

3.high efficiency,high mechanical strength and high quality aluminum alloy housing

4.long life service,large output torque,low noise and little vibration

5.low temperature rise,omnibearing installation ,easy to connect with other machinery.

6.high carry ability,elegant apperance.

7.CE standard,input power can be 0.06KW-15KW

8.stable transmission
 

Product Parameters

­
 

Detailed Photos

 

More Models

 

Packaging & Shipping

 

Company Profile

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Layout: Coaxial
Gear Shape: Bevel / Miter
Type: Planetary Gear Reducer
Output Torque: 0-50 Nm
Customization:
Available

|

Customized Request

gearbox

Can I Use Synthetic Oil in My Gearbox?

Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:

  • Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
  • Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
  • Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
  • Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
  • Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
  • Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
  • Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.

However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.

China Standard High Precision Motor Reductor Hollow Shaft Speed Reducer Rotary Flange Output Type Planetary Gearbox Padr Series   best automatic gearbox	China Standard High Precision Motor Reductor Hollow Shaft Speed Reducer Rotary Flange Output Type Planetary Gearbox Padr Series   best automatic gearbox
editor by CX 2024-04-02

China factory Factory Direct Sales K Series Helical Bevel Geared Motor Speed Reducer Motor Gearbox with Good quality

Product Description

Technical data:

Product Description

-K Series Helical Bevel Gearbox
 

K series gear reducer, manufactured according to international technical requirements, has a high scientific and technological content; Space saving, reliable and durable, high overload capacity, power up to 132KW; Low energy consumption, superior performance, reducer efficiency up to 95%
It is designed and manufactured on the basis of module combination system. There are a lot of motor combinations, installation forms and structural schemes. The transmission ratio is classified carefully to meet different operating conditions and realize electromechanical integration.

High transmission efficiency, low energy consumption and superior performance.

Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface is carburized, quenched and hardened, and the gear is finely ground. It features stable transmission, low noise, large bearing capacity, low temperature rise, and long service life. Performance and characteristics:

1. The gear is carburized and quenched with high-quality alloy, the hardness of the tooth surface is up to 60 ± 2hrc, and the grinding accuracy of the tooth surface is up to 5-6

2. The computer modification technology is used to pre modify the gear, which greatly improves the bearing capacity of the reducer

3. Complete modular structure design is adopted from the box to the internal gear, which is suitable for large-scale production and flexible selection

4. The standard reducer models are divided according to the form of decreasing torque. Compared with the traditional equal proportion division, they are more in line with customer requirements and avoid power waste

5. It is designed and manufactured by cad/cam to ensure the stability of quality

6. Multiple sealing structures are adopted to prevent oil leakage

7. Multi directional noise reduction measures to ensure the excellent low noise performance of the reducer

8. The installation mode of Liyi products is flexible, which makes it easy for customers to choose K57 reducer, K67 reducer, K77 reducer, K87 reducer, K97 reducer, KA87 reducer, KA97 reducer, KA107 reducer, KA127 reducer

 

Our Advantages

 

 

 

Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Expansion
Gear Shape: Bevel Gear
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

gearbox

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China factory Factory Direct Sales K Series Helical Bevel Geared Motor Speed Reducer Motor Gearbox   with Good quality China factory Factory Direct Sales K Series Helical Bevel Geared Motor Speed Reducer Motor Gearbox   with Good quality
editor by CX 2023-06-14

China manufacturer Right Angel Helical-Bevel Gear Motor Geared Reducer Gearbox for Generators synchromesh gearbox

Product Description

 

Product Description

EasyFit  SYSTEM

The EasyFit System greatly improves the efficiency of cooperation with our partners. In a few steps, they are then assembled into geared motors in assembly centers and dealers around the world. The final assembly of the 3 components takes only 5 minutes.

S4 Family

SP4 Parallel shaft gear motor (F Series)

Foot, flange mounting, integrated motor, hollow shaft/solid shaft design

Output Torque Range: 200 – 15000 Nm

Ratio Range:   i = 3.5 – 30000

Power Range: 0.12 – 90 kW

Size Model: 1-8

 

SK4 Right angle shaft gear motor (K Series)

Foot, flange mounting, integrated motor, hollow shaft/solid shaft design

Output Torque Range:  440 – 20000 Nm

Ratio Range:  i = 7.1 – 30000

Power Range:  0.12 – 90 kW  
 
Size Model:  2-9

 

SI4 Inline kelical gear motor (R Series)

Foot, flange mounting, integrated motor

Output Torque Range:  200 – 25000 Nm

Ratio Range:  i = 2.8 – 30000

Power Range:  0.12 – 90 kW

Size Model:  1-9

 

Product Parameters

Type SK Series Bevel-Helical Gear Reducer
Model SKZN26,SKZN36,SKZN46,SKZN56,SKZN66,SKZN76,SKZN86,SKZN96
Size Type 2 ~ 9
Color RAL5015 Sky Blue/ GNORD Special Colour / RAL9002 Pearl While / RAL9005 Black / Customer Request
Material Housing: GG20,GG40 high-strength cast iron
Gear: 17CrNiMo6
Input/Output Shaft: 42CrMo alloy steel
Bearing NSK or NTN 
Seal S.K.F or Simrit
Machining Precision of gears Accurate grinding, 6-7 Grade
Lubricating oil Chevron Meropa/ Shell / Mobil
Warranty 1 Year
Packing Fumigation wooden case

 

Products’ End Users Show

 

Accessories

Company Profile

   GNORD is the brand affiliated to Acorn Industrial Corporation in United Stated and a subsidiary with entire capital and holdings from Chinese listed company. CZPT DRIVE has originated from German and American technology since 1908. The production base is located in HangZhou, ZheJiang , covering an area of 50000  square CZPT and with first phase investment of amount RMB 4 hundred million yuan (Amount to about USD 64 million). CZPT has the overall capabilities of design, research and development, production, marketing and service in the fields of all kinds of transmission systems and high precision parts. With the high level of product R&D and manufacturing capabilities, CZPT focuses on providing products in multiple fields and all-round services, which mainly face to the global high-end transmission market.
    The product quality assurance of CZPT is derived not only from the acquisition of  equipment of both gear motors and gearboxes from HangZhou Rexnord Transmissions Co.,Ltd as well as the intellectual property rights of CZ08 gearbox of United States and S4 series gear motor production line of Germany, but also from the taking over of factory staffs from HangZhou Rexnord which include the employees of production, R&D and sales group of gear motors and gear boxes. Xihu (West Lake) Dis.d by several patents and advanced manufacturing techniques, CZPT are now specializing in the production of gear motors, gearboxes,  special gearboxes for high performance welding robot and other related transmission device and parts, etc.
 

Sample Room

Exhibition

 

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Expansion
Gear Shape: Conical – Cylindrical Gear
Step: Double-Step
Customization:
Available

|

Customized Request

Types of Vehicle Gearboxes

In a vehicle, there are many types of gearboxes available. There are planetary gearboxes, Coaxial helical gearboxes, and skew bevel helical gearboxes, among others. In this article, we’ll cover all of them and help you determine which type of gearbox would be right for your vehicle. Also, we’ll discuss how each differs from the others.
gearbox

planetary gearbox

A planetary gearbox is composed of three main components: a sun gear, an input bevel gear, and an output shaft. A planetary gearbox can have different output torques and ratios. The basic model of a planetary gearbox is highly efficient and transmits 97% of the power input. There are several kinds of planetary gearboxes, depending on the type of operation. In general, there are three types: the simple, the intermediate, and the complex.
The price of a planetary gearbox can vary a lot, and it’s important to know what you’ll need. Different manufacturers produce different planetary gearboxes, so check with a manufacturer to see what they have available. Make sure to check the quality of the planetary gearbox before making a final purchase. In addition, be sure to compare the prices and the availability of a particular product. A quality planetary gearbox will provide years of trouble-free operation and will not break your bank.
Planetary gears feature an integer number of teeth. Each planet has teeth that must mesh with its ring or sun. The number of planets, ring, and tooth count of each gear determine whether the teeth mesh. Some planets have fewer teeth than others, so they mesh better than others. However, compound planets can be more flexible and achieve higher reduction ratios. If you’re looking for a planetary gearbox for your next project, consider getting in touch with a manufacturer who specializes in this technology.
When it comes to construction, a planetary gearbox is no exception. It’s extremely important to choose the right planetary gear for your application, because an imbalance in the planet gear can cause increased wear and failure. Moreover, the compact size of a planetary gear ensures maximum heat dissipation. However, a planetary gear box may require cooling in some applications. A planetary gearbox will make your life easier, and it will give you years of trouble-free operation.

Straight bevel helical gearbox

The Straight bevel helical gearbox has a number of advantages, but it has a relatively short manufacturing process. Its most popular application is in the automotive industry, where it is used in many types of vehicles. Other applications include heavy and light equipment and the aviation and marine industries. Below is a brief introduction to this gearbox type. Read on to learn about its benefits. This type of gearbox is one of the easiest to manufacture.
The spiral bevel gear has larger teeth than straight bevel gears, resulting in a smoother, quieter rotation. It can handle high-speed heavy loads with less vibration. Spiral bevel gears are classified by their tooth form and cutting method. Straight bevel gears are easier to design and manufacture, but spiral bevel gears are more expensive. Both designs are suitable for high-speed, heavy-load operations, and general manufacturing applications.
In addition to being easy to install, the modular bevel gears have many advantages. They have an exceptionally high degree of interchangeability and feature the highest standards of component integrity. They can also be tailored to meet your specific requirements. The advantages of this gearbox type include high precision, optimum performance, and low noise. And because they are modular, they can be produced in a variety of finishes. These include stainless steel, titanium, and bronze.
Straight bevel helical gearbox manufacturers are committed to a high degree of precision in their designs. The radii, torques, and tooth profiles of straight bevel gears are more precisely measured than those of cylindrical bevel gears. The same calculations are used for all traditional bevel gear generators. This ensures that your 5-axis milled bevel gear sets have the same calculations and layout.
gearbox

Coaxial helical gearbox

The Coaxial helical gearbox is a highly efficient transmission system that is well suited for light-duty applications. Compared to spur-type gearboxes, the real pitch of a Coaxial helical gearbox is low at all helix angles. This is because the coaxial type has the same number of teeth and center gap as the spur gearbox. Coaxial helical gearboxes also have a smaller footprint and are compact.
Several nations have implemented lockdown regulations for Industrial Gearbox trade, threatening the global economy. Several factors have been implicated in COVID-19, including supply chain, market, and financial markets. Experts are monitoring the situation globally and project remunerative prospects for gearbox manufacturers after the crisis. This report depicts the latest scenario and offers a comprehensive analysis of COVID-19’s impact on the entire industry.
This Coaxial helical gearbox features a compact structure and high precision gear. Its three-stage design combines two-stage gears with a single-stage gear, forging high-quality alloy steel for high precision and durability. The gears are serially-designed for easy interchangeability. They are also available in high-frequency heat-treated steel. A Coaxial helical gearbox is the perfect solution for many applications.
Coaxial helical gearboxes have the added benefit of using cylindrical gears instead of shafts. They operate quietly, and have more surface area to interact with. Their fixed angles make them suitable for heavy-duty applications, like in conveyors, coolers, and grinders. Compared to other gearbox types, Helical gearboxes have higher power-carrying capacity. Listed below are the benefits of a Coaxial Helical Gearbox

Skew bevel helical gearbox

A Skew bevel helical gear box is a common type of industrial gearbox. These gearboxes are rigid and compact and can be used in a variety of applications. They are commonly used in heavy-duty applications such as grinding mills, conveyors, and coolers. They are used in many applications to provide rotary motions between non-parallel shafts. They also have the added benefit of high-efficiency in a variety of industries.
Skew bevel helical gear boxes are suitable for heavy loads and are monolithic in construction. This type of gearbox combines the benefits of bevel and helical gears for right-angle torque, which makes it a popular choice for heavy-duty applications. In addition to being a robust and reliable gearbox, these gearboxes are highly customizable and can meet almost any industrial need.
To maximize the efficiency of bevel gears, FE-based tooth contact analysis is used to develop a sophisticated geometry optimization algorithm. The software also allows users to define optimal flank topography by introducing application-specific weightings for specific load levels. With this data, a manufacturing simulation is conducted to determine the best variant. A robust variant combines the benefits of efficiency, load-carrying capacity, and low excitation behavior.
The helical gear can be angled at 90 degrees. This is similar to a spur gear but produces less noise. It can achieve a nine-to-one speed reduction with one stage. However, a helical gear requires a larger driver gear for higher reductions. This gearbox is suitable for speeds from 1:1 to three times. They are often used in the manufacture of motors and generators.
gearbox

Extruder helical gearbox

An extruder helical gearbox is one of the most common industrial gears. It is compact in size and low-power consuming, making it ideal for heavy-duty applications. Extruder helical gearboxes are suitable for a variety of industrial applications, including cement, plastics, rubber, conveyors, and coolers. In addition to its use in plastics and rubber manufacturing, this gearbox is also useful in other low-power applications such as crushers, coolers, and conveyors.
CZPT SG series Extruder Helical Gearboxes are available in Single Screw and Twin Screw Variations. These gears feature a compact design, high power density, and long service life. Axial bearing housing and thrust bearings are mounted on the input shafts. Extruder helical gearboxes can be installed in various positions, including horizontal, vertical, and inclined.
Helicoidal gears are often produced in a modular manner. This design provides multiple benefits, including engineering and performance advantages, modular production, and the highest level of component integrity. A single helical gearbox can be assembled into a larger gearbox if needed, but modular production ensures consistent performance and economy. This modular design is also cost-effective. It is a versatile and reliable solution for a wide range of applications.
In addition to its efficiencies, Extruder helical gearboxes also have a low noise profile. They have no squeal sounds, and they are silent when running. They can transfer more power than conventional gearboxes. This type of gear has been used in the manufacturing of high-quality plastic products for years. They are often used for applications in automotive transmissions. Aside from being quiet, helical gears have higher contact levels and lower vibration.

China manufacturer Right Angel Helical-Bevel Gear Motor Geared Reducer Gearbox for Generators   synchromesh gearbox	China manufacturer Right Angel Helical-Bevel Gear Motor Geared Reducer Gearbox for Generators   synchromesh gearbox
editor by CX