Tag Archives: gearbox reducer

China Standard 380V Cast Alu Helical Gear Reducer Three Phase AC Motor Gearbox Nmrv75 car gearbox

Product Description

Product Description

Model No.: NMRV/NRV571, 030, 040, 050, 063, 075, 090, 110, 130
Reduction gear, worm gear, gear reducer
Reduction gear

Features:
1) High quality aluminum alloy die cast gearbox
2) High accuracy worm gear and worm shaft
3) Less noise and lower temperature increase
4) Easy mounting and linking, high efficiency
5) Power: 0.06 – 15kW
6) Output torque: 2.7 – 1, 760Nm
7) Transmission rate: 5 – 100
Inner packing: Carton Outer packing: Wooden case
Reduction gear, worm gear, gear reducer

  model   PAM IEC   N   M P   7.5D   10D   15D   20D   25D   30D   40D   50D 60D    80D
  NMRV030   63B5   95   115   140   11   11   11   11   11   11   11   /   /   /
  NMRV030   63B14   60   75   90   11   11   11   11   11   11   11   /   /   /
  NMRV030   56B5   80   100   120   9   9   9   9   9   9   9   9   9   9
  NMRV030   56B14   50   65   80   9   9   9   9   9   9   9   9   9   9
  NMRV040   71B5   110   130   160   14   14   14   14   14   14   14   /   /   /
  NMRV040 71B14    70   85   105   14   14   14   14   14   14   14   /   /   /
  NMRV040   63B5   95   115   140   11   11   11   11   11   11   11   11 11    11
  NMRV040   63B14   60   75   90   11   11   11   11   11   11   11 11    11   11
  NRMV050   90B5   130   165   200   19   19   19   19   19   /   /   /   /   /
  NRMV050   80B14   80   100   120   19   19   19   19   19   /   /   /   /   /
  NRMV050   71B5   110   130   160   14   14   14   14 14    14     14   14   14   14
  NRMV050   71B14   70   85   105   14   14   14   14   14   14   14   14   14   14
  NMRV063   90B5   130   165   200   24   24   24   24   24   24   /   /   /   /
    NMRV063   90B14   95   115   140   24   24   24   24   24   24   /   /   /   /
    NMRV063   80B5   130   165   200   19   19   19   19   19   19   19   19   /   /
    NMRV063   80B14   80   100   120   19   19   19   19   19   19   19   19   /   /
  NRMV075   100/112B5   180   215   250   28   28   28   /   /   /   /   /   /   /
  NRMV075   100/112B14   110   130   160   28   28   28   /   /   /   /   /   /   /
  NRMV075   90B5   130   165   200   24   24   24   24   24   24   24   /   /   /
  NRMV075   90B14   95   115   140   24   24   24   24   24   24   24   /   /   /
  NMRV090   100/112B5   180   215   250   /   /   /   /   24   24   24   24   24   24
    NMRV090   100/112B14   110   130   160   /   /   /   /   24   24   24   24   24   24
    NMRV090   90B5   130   165   200   /   /   /   /   /   /   /   19   19   19
    NMRV090   90B14   95   115   140   /   /   /   /   /   /   /   19   19   19

Ms series aluminum housing three-phase asynchronous motors, with latest design in entirety, are made of selected quality materials and conform to the IEC standard.

MS series motor have good performance, safety and reliable operation, nice appearance, and can be maintained very conveniently, while with low noises, little vibration and at the same time light weight and simple construction. These series motors can be used for general drive.
OPERATING CONDITIONS
Ambient temperature: -15° C<0<40° C
Altitude: Not exceed 1000m.
Rated voltage: 380V, 220V~760V is available.
Rated frequency: 50Hz/60Hz
Duty/Rating: S1(Continuous)
Insulation class: F
Protection class: IP54
Cooling method: IC0141

Model Rated power Current Power factor Efficiency speed Locked Rotor
 torque
Locked Rot or Current Breakdown Torque
Type (KW) (A) (cosΦ) (η%) (r/min) Tst
TN
Ist
TN
Tmax
TN
synchronous speed 3000r/min(380V 50HZ)
MS561-2 0.09 0.29 0.77 62 2750 2.2 5.2 2.1
MS562-2 0.12 0.37 0.78 64 2750 2.2 5.2 2.1
MS631-2 0.18 0.53 0.8 65 2780 2.3 5.5 2.3
MS632-2 0.25 0.69 0.81 68 2780 2.3 5.5 2.3
MS711-2 0.37 1.01 0.81 69 2800 2.2 6.1 2.3
MS712-2 0.55 1.38 0.82 74 2800 2.3 6.1 2.3
MS801-2 0.75 1.77 0.83 75 2825 2.3 6.1 2.2
MS802-2 1.1 2.46 0.84 76.2 2825 2.3 6.9 2.2
MS90S-2 1.5 3.46 0.84 78.5 2840 2.3 7.0  2.2
MS90L-2 2.2 4.85 0.85 81 2840 2.3 7.0  2.2
MS100L-2 3 6.34 0.87 82.6 2880 2.3 7.5 2.2
MS112M-2 4 8.20  0.88 84.2 2890 2.3 7.5 2.2
MS132S1-2 5.5 11.1 0.88 85.7 2900 2.3 7.5 2.2
MS132S2-2 7.5 14.9 0.88 87 2900 2.3 7.5 2.2
MS160M1-2 11 21.2 0.89 88.4 2947 2.3 7.5 2.2
MS160M2-2 15 28.6 0.89 89.4 2947 2.3 7.5 2.2
MS160L-2 18.5 34.7 0.90  90 2947 2.3 7.5 2.2
synchronous speed 1500 r/min(380V 50HZ)
MS561-4 0.06 0.23 0.70  56 1300 2.1 4.0  2.0 
MS562-4 0.09 0.33 0.72 58 1300 2.1 4.0  2.0 
MS631-4 0.12 0.44 0.72 57 1330 2.2 4.4 2.1
MS632-4 0.18 0.62 0.73 60 1330 2.2 4.4 2.1
MS711-4 0.25 0.79 0.74 65 1360 2.2 5.2 2.1
MS712-4 0.37 1.12 0.75 67 1360 2.2 5.2 2.1
MS801-4 0.55 1.52 0.75 71 1380 2.3 5.2 2.4
MS802-4 0.75 1.95 0.76 73 1380 2.3 6.0  2.3
MS90S-4 1.1 2.85 0.77 76.2 1390 2.3 6.0  2.3
MS90L-4 1.5 3.72 0.78 78.2 1390 2.3 6.0  2.3
MS100L1-4 2.2 5.09 0.81 81 1410 2.3 7.0  2.3
MS100L2-4 3 6.78 0.82 82.6 1410 2.3 7.0  2.3
MS112M-4 4 8.8 0.82 84.6 1435 2.3 7.0  2.3
MS132S1-4 5.5 11.7 0.83 85.7 1445 2.3 7.0  2.3
MS132S2-4 7.5 15.6 0.84 87 1445 2.3 7.0  2.3
MS160M-4 11 22.5 0.84 88.4 1460 2.2 7.0  2.3
MS160L-4 15 30.0  0.85 89.4 1460 2.2 7.5 2.3
                 
Model Rated power Current Power factor Efficiency speed Locked Rotor
 torque
Locked Rot or Current Breakdown Torque
Type (KW) (A) (cosΦ) (η%) (r/min) Tst
TN
Ist
TN
Tmax
TN
synchronous speed 1000 r/min(380V 50HZ)
MS711-6 0.18 0.74 0.66 56 900 2.0  4.0  1.9
MS712-6 0.25 0.95 0.68 59 900 2.0  4.0  1.9
MS801-6 0.37 1.23 0.70  62 900 2.0  4.7 1.8
MS802-6 0.55 1.70  0.72 65 900 2.1 4.7 1.8
MS90S-6 0.75 2.29 0.72 69 900 2.1 5.3 2.0 
MS90L-6 1.1 3.18 0.73 72 910 2.1 5.5 2.0 
MS100L-6 1.5 4.0  0.76 76 910 2.1 5.5 2.0 
MS112M-6 2.2 5.6 0.76 79 940 2.1 6.5 2.0 
MS132S-6 3 7.40  0.76 81 940 2.1 6.5 2.1
MS132M1-6 4 9.5 0.76 82 960 2.1 6.5 2.1
MS132M2-6 5.5 12.6 0.77 84 960 2.1 6.5 2.1
MS160M-6 7.5 17.2 0.77 86 960 2.0  6.5 2.1
MS160L-6 11 24.5 0.78 87.5 960 2.0  6.5 2.1
synchronous speed 750 r/min(380V 50HZ)
MS801-8 0.18 0.83 0.61 51 630 1.9 3.3 1.8
MS802-8 0.25 1.10  0.61 54 640 1.9 3.3 1.8
MS90S-8 0.37 1.49 0.61 62 660 1.9 4.0  1.8
MS90L-8 0.55 2.17 0.61 63 660 2.0  4.0  1.8
MS100L1-8 0.75 2.43 0.67 70 690 2.0  4.0  1.8
MS100L2-8 1.1 3.36 0.69 72 690 2.0  5.0  1.8
MS112M-8 1.5 4.40  0.70  74 680 2.0  5.0  1.8
MS132S-8 2.2 6.00  0.71 79 710 2.0  6.5 1.8
MS132M-8 3 7.80  0.73 80 710 2.0  6.5 1.8
MS160M1-8 4 10.3 0.73 81 720 2.0  6.6  2.0 
MS160M2-8 5.5 13.6 0.74 83 720 2.0  6.6  2.0 
MS160L-8 7.5 17.8 0.75 85.5 720 2.0  6.6 2.0 

Detailed Photos

Our Advantages

We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price 
What we do:
1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting – both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting – both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,

FAQ

Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial, Household Appliances, Power Tools
Operating Speed: Constant Speed
Number of Stator: Three-Phase
Species: Y, Y2 Series Three-Phase
Rotor Structure: Squirrel-Cage
Casing Protection: Protection Type
Samples:
US$ 119/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Common Problems with Gearboxes and How to Troubleshoot Them

Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:

  1. Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
  2. Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
  3. Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
  4. Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
  5. Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
  6. Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
  7. Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
  8. Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
  9. Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
  10. Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.

Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.

China Standard 380V Cast Alu Helical Gear Reducer Three Phase AC Motor Gearbox Nmrv75   car gearbox	China Standard 380V Cast Alu Helical Gear Reducer Three Phase AC Motor Gearbox Nmrv75   car gearbox
editor by CX 2024-05-14

China OEM 3 Phase 200 Ratio Three Phase Medium Motor Reduction Gearbox for Electric Motor Gear Reducer gearbox drive shaft

Product Description

3 Phase AC Reducer Motor 1/2hp 220V 380V 400W Gear Precision Foot Mounted Reducer Motor

CV and CH series motor can be designed as Single phase and 3 phases type. And power range is from 0.1KW to 3.7KW. The motor can be mounted with brake, and brake type is No excitation type. Material of gears is advanced special alloy steel and all gears are carburizing hardening. This gear motor has been added with senior lubricants, and no needs to added lubricants again.

Helical gear reducer has the characteristics of strong versatility, good combination, and strong bearing capacity, and has the advantages of easy access to various transmission ratios, high efficiency, small vibration, and high allowable axial and radial loads.

This series of products can not only be used in combination with various reducers and vibrators to meet the requirements, but also has the advantage of localization of related transmission equipment.
 

Mostly used in metallurgy, sewage treatment,chemical, pharmaceutical and other industries.

 

Type CH series  three phase or single phase ac motors for industrial use 
Voltage 220VAC, 380VAC, 415VAC
Power range Power range is 0.1KW to 3.7KW
Output Speed Speed range is from 7rpm to 500rpm
Phase Single phase and 3phases for choice
Gears Special alloy steel and high precise gears
Grease Good grease and no need add grease during using
Cooling Full closed fan
USE This motor is widely used in
packing machine, textil machine
motor is widely used in mix 
machine,elevator, conveyor,etc.
OEM Service We offer OEM service.

  

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Three-Step
Samples:
US$ 70/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Common Problems with Gearboxes and How to Troubleshoot Them

Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:

  1. Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
  2. Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
  3. Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
  4. Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
  5. Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
  6. Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
  7. Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
  8. Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
  9. Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
  10. Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.

Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.

China OEM 3 Phase 200 Ratio Three Phase Medium Motor Reduction Gearbox for Electric Motor Gear Reducer   gearbox drive shaft	China OEM 3 Phase 200 Ratio Three Phase Medium Motor Reduction Gearbox for Electric Motor Gear Reducer   gearbox drive shaft
editor by CX 2024-04-29

China Standard Zlyj146 173 225 250 Gear Box Helical Reducer Gearbox manufacturer

Product Description

Product Description

CHINAMFG  gearbox series are transmission devices, which are specially designed for single-screw extruder with high precision, hard gear surface, accompany with thrust. Adopting the technical specifications stipulated in JB/T9050. 1-1999, all CHINAMFG gearboxes are designed accordingly.

 

Product Parameters

Spec.

Ratio Range

Axial Thrust

Screw Diameter

Net Weight

(KN)

(mm)

(KG)

112

8/10/12.5

41

Φ35

95

133

8/10/12.5/14/16/18/20

54

Φ50

144

146

8/10/12.5/14/16/18/20

60

Φ55

205

173

8/10/12.5/14/16/18/20

153

Φ65

256

200

8/10/12.5/14/16/18/20

187

Φ75

500

225

8/10/12.5/14/16/18/20

250

Φ90

650

250

8/10/12.5/14/16/18/20

268

Φ100

815

280

8/10/12.5/14/16/18/20

356

Φ105,110

1571

315

8/10/12.5/14/16/18/20

403

Φ120

1410

330

8/10/12.5/14/16/18/20

448

Φ130,150

1520

375

8/10/12.5/14/16/18/20

495

Φ150,160

1800

420

8/10/12.5/14/16/18/20

545

Φ165

2750

450

8/10/12.5/14/16/18/20

590

Φ165

3560

Detailed Photos

Machine Parts 

Name: High Quality CHINAMFG Gearbox 

Original: China Gear material: high alloy steel low carbon (20CrMnTi)The interface is hardened, precision-ground and hard-chrome-plated to 870HV hardness and Ra 0.8-1.6µm roughness, so the shaft-seal is super hard, resists wear and corrosion, and very durable.

Main Features 

Made of carburizing steel (Forging), go through normalization heat treatment for forged carburizing steel; and gear faces are also nitride-treated to at least 60HRC hardness for optimal rigidity and carburizing depth 0.8-1.1MM and wear resistance.

Single Screw Extruder Gearbox

Our CHINAMFG gearbox for single screw extruder adopts high strength alloy steel material and the gear is of high accuracy. It is less
noisy, work quietly and smoothly. So it is a longer service life.

Gearbox casting body

1. we prepare enough casting body in our workshop to guarantee the delivery time.
2. this is our new gearbox casting body design.
3. fast delivery time and high quality

Heat treatment furnace

 

We have own heat treatment for the gears and gearshaft, so it’s easy for us to control the quality and the quality is more gurantee.

 

Packaging & Shipping

1)Packing: Wrapped up by film in wooden cases

2)Port Departure: HangZhou Port

3)Delivery time: 25 working days CHINAMFG receipt of 30% deposit(days based on your quantity)

We use strong plywood or wooden case for all our products.

FAQ

Q1. Are you a trading company or a manufacturer?
We are a BSCI&ISO-9001 certificated manufacturer.

Q2. Can I place the customized order for different sizes, colors, materials,packings….?
Yes, all the customized orders are welcomed.

Q3. Could I get a QC report before delivery?
Yes, the specific QC reports will be sent to you before delivery.

Q4. Can I get a lower price if I place a larger order?
Yes, the price will be modified according to your order quantities.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Fast Service
Warranty: One Year
Standard: DIN, ASTM
Technics: Casting
Feature: Corrosion Resistance
Material: Metal
Customization:
Available

|

Customized Request

gearbox

Benefits of Regular Gearbox Maintenance

Regular maintenance of gearboxes offers numerous advantages:

  • Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
  • Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
  • Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
  • Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
  • Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
  • Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
  • Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
  • Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
  • Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.

Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.

China Standard Zlyj146 173 225 250 Gear Box Helical Reducer Gearbox   manufacturer China Standard Zlyj146 173 225 250 Gear Box Helical Reducer Gearbox   manufacturer
editor by CX 2024-04-19

China Standard High Precision Motor Reductor Hollow Shaft Speed Reducer Rotary Flange Output Type Planetary Gearbox Padr Series best automatic gearbox

Product Description

Product Description

 

Rotary speed reducer/slewing drive

Main fetures:

1.large speed ratio range

2.small volume,low weight ,saving space for mounting.

3.high efficiency,high mechanical strength and high quality aluminum alloy housing

4.long life service,large output torque,low noise and little vibration

5.low temperature rise,omnibearing installation ,easy to connect with other machinery.

6.high carry ability,elegant apperance.

7.CE standard,input power can be 0.06KW-15KW

8.stable transmission
 

Product Parameters

­
 

Detailed Photos

 

More Models

 

Packaging & Shipping

 

Company Profile

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Layout: Coaxial
Gear Shape: Bevel / Miter
Type: Planetary Gear Reducer
Output Torque: 0-50 Nm
Customization:
Available

|

Customized Request

gearbox

Can I Use Synthetic Oil in My Gearbox?

Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:

  • Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
  • Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
  • Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
  • Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
  • Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
  • Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
  • Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.

However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.

China Standard High Precision Motor Reductor Hollow Shaft Speed Reducer Rotary Flange Output Type Planetary Gearbox Padr Series   best automatic gearbox	China Standard High Precision Motor Reductor Hollow Shaft Speed Reducer Rotary Flange Output Type Planetary Gearbox Padr Series   best automatic gearbox
editor by CX 2024-04-02

China supplier Z Series CZPT Hard Tooth Surface Gear Reducer Gearbox synchromesh gearbox

Product Description

Z Series CHINAMFG Cylindrical Gear Reducer in Hardened Tooth Surface

Gear Reducer technical data
 

Size 80,100,125,160,200,250,280,315,355,400,450,500,560
Ratio 1.25, 1.4, 1.6, 1.8, 2, 2.24, 2.5, 2.8, 3.15, 3.55, 4, 4.5, 5, 5.6
The rotation speed of high speed shaft no more than 1500rpm.
The circumferential velocity of gear no more than 20m/s.
Ambient temperature -40~45ºC. Lubricant should be heated up to 0ºC before starting if the ambient temperature is below 0ºC
Direction clockwise and un-clockwise

Gear Reducer Features

1.The gear is made of high strength low carbon alloy steel through carburization and quenching. The hardness of tooth surface may reach to HRC58-62. All gear adapts NC tooth grinding process, high in accuracy and good in contact performance;

2.High in transmission efficiency: single stage, more than 96.5%; double-stage, more than 93%; three-stage, more 90%;

3.Smooth and stable in run, low noise;

4.Compact, light, long life, high bearing capacity;

5.Easy to disassemble, inspect and assemble.

Gear Reducer  Aplication fields

widely used in various low-speed transmissions,
which are general basic parts of mechanical transmission.
Such as metallurgy, mines, hoisting, transportation, cement, architecture, chemical, textile, printing and dyeing, pharmaceutical, etc…. 

FAQ
 
Q: What is your MOQ of this item?
A: 1pcs. For the first time cooperation, we accept trial sample order.
 
Q: What’s your payment terms? 
A: 30% T/T deposit, 70% balance before shipment or L/C at sight.
 
Q: What’s the delivery time?
A: 30 days after receiving your L/C or T/T deposit.

Q: Can we used our own brand on motors ?
A: Sure, we can offer OEM service, manufacture with your authorized brand.

Q: How long is your warranty?
A: 12 months after receiving B/L.

Factory
Office Block

Office Staff
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agricultural Machinery, Belt Conveyor, Bucket Elevator,Agitator, Hositing
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step
Customization:
Available

|

Customized Request

gearbox

Is it Better to Repair or Replace a Damaged Gearbox?

Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:

  • Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
  • Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
  • Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
  • Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
  • Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
  • Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
  • Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.

Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.

China supplier Z Series CZPT Hard Tooth Surface Gear Reducer Gearbox   synchromesh gearbox	China supplier Z Series CZPT Hard Tooth Surface Gear Reducer Gearbox   synchromesh gearbox
editor by CX 2024-02-20

China factory XE700 Rotary/speed/planetary reducer spare parts gearbox Factory Price gearbox engine

Product Description

Product Description

Reducer Model Applicable Machine Model Motor Install Hole Housing Install Hole Shaft Pinion Gear Diameter Shaft Pinion Gear Height Shaft Pinion No. Teeth Weight/kg
A B C H Z
GS21A06 XCMGXE700 198×198 4-M16 φ430 12-φ26 φ256 125 13 333.84
GS21A05 Xihu (West Lake) Dis.de380 198×198 4-M16 φ430 12-φ28 φ238 110.5 14 322.53

 

 

Company Profile

     Junze Precision Machinery (ZheJiang ) Co., LTD., a wholly-owned subsidiary of Xihu (West Lake) Dis.n Group, was put into operation in October 2016 with a total investment of 250 million Yuan and a total construction area of 28,800 square meters. We mainly undertake coarse and finishing parts, reducer, gearbox, bridge and other supporting products, which are used in heavy machinery such as construction machinery excavator, high-speed railway and special industries. The construction of this project enables high-end parts finishing, reducer and bridge box production technology to reach the international advanced level.

    Products: Mainly undertake coarse finishing parts, reducer, gearbox, bridge and other supporting products, which are used in construction machinery excavator, high-speed railway and other heavy machinery. The construction of this project enables high-end parts finishing, reducer and bridge box production technology to reach the international advanced level.
1. At present, the company has a technical research and development team of more than 70 people, more than 90% of which have more than 10 years of hydraulic product technology accumulation, has become the main force of the company to develop new products.
2, the company currently around the hydraulic excavator hydraulic parts, products have formed a series:
Three major systems have been developed:
Positive flow system, negative flow system, load sensing control system;
Five series:
6 ton products, 8 ton products, 20 ton products, 40 ton products, concrete series products.

 

Packing

Packing according to customer’s requirement

ODM & OEM are both ok, since we have a sophisticated R&D team and precise equipment with the yearly output of 35000 pieces. 
Besides, we have another 4 brother companies belonging to our Xihu (West Lake) Dis.n Group. One is Xihu (West Lake) Dis.de Construction Machinery Co., Ltd, which manufactures excavators, 1 is ZheJiang Xihu (West Lake) Dis.n Paike Agricultural Machinery Co., Ltd, which is an agricultural machinery manufacturing enterprise integrating R&D, manufacturing, sales and service, 1 is ZheJiang Xihu (West Lake) Dis.n Casting Industry Co. Ltd which produces cast iron and other metals, the other is ZheJiang CHINAMFG Hydraulics  Co., Ltd. which produces pumps, valves, motors.   
So, please feel no hesitate to send your inquiries, we will offer you the best price in time and the thoughtful service forever.
  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Video and online technical support
Warranty: two years/3000 hours
Certification: ISO
Condition: New
Transmission: Hydraulic – Mechanical
Walking Mode: Wheeled
Customization:
Available

|

Customized Request

gearbox

Different Types of Gearboxes and Their Applications

There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:

  • Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
  • Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
  • Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
  • Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
  • Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
  • Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
  • Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.

Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.

China factory XE700 Rotary/speed/planetary reducer spare parts gearbox Factory Price   gearbox engineChina factory XE700 Rotary/speed/planetary reducer spare parts gearbox Factory Price   gearbox engine
editor by CX 2024-01-16

China supplier Shaft Mounted Speed Reducer ATA Series Gearbox gearbox assembly

Product Description

Product Description

Shaft mounted speed reducer ATA series gearbox

Components:

1. Housing: Nodular Cast Iron(Ductile Iron) QT600
2. Gears Profile: Hardened Helical Gears
3. Gears Material: 20CrMnTi
4. Gears Processing: Carburizing, Quenching, Grinding
5. Gears Hardness: Surface Hardness: HRC58-62, Inner Hardness: HBS156-207
6. Gears Accuracy: 6 Class
7. Shafts Material: 40Cr
8. Input Configurations:
Keyed CHINAMFG Shaft Input
IEC Normalized Motor Flange
9. Output Configurations:
Keyed Hollow Shaft Output
10. Oil Seal: ZheJiang SOG
11. Bearings: ZWZ, LYC
12. Spare Parts: Torque arm, Optional Backstop

The features of ATA shaft mounted gearbox:
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Single key hollow shaft, each model can select 3 hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It’s very convenient to be mounted.

The maintenance of ATA shaft mounted gearbox:
1. Before starting the reducer must be filled of N159 or N220 extreme pressure industrial gear oils, till the gearbox oil shows an intermediate position
2. After 3 months running, the gearbox need to change oil, attention it must be debris inside the machine rinse before adding new oil.
3. At the reducer hollow shaft ends and drive pulley end gland plate must fastened with locking screws.
4. The reducer pulley and the motor pulley must be parallel when they are installed and the belt tightness should be moderate.

Detailed Photos

Rated Power
 
1.1~193KW
Intput Speed
 
500~1400r/min
Output Speed
 
25~300r/min
Ratio
 
IN=5.0…31.5
Installation Form
 
Shaft mounted

The models of ATA shafted mounted gearbox:
1 Stage: ATA30, ATA35, ATA40, ATA45, ATA50, ATA60, ATA70, ATA80, ATA100, ATA125
2 Stage: ATA35D, ATA40D, ATA45D, ATA50D, ATA60D, ATA70D, ATA80D, ATA100D, ATA125D

Product Parameters

Gearbox Parameters:

Models Output Bore Dia. Maximum Torque Nominal Ratio(i)
ATA30 30mm 180Nm 5

7

10

12.5

15

20

25

31

ATA35 35mm 420Nm
ATA40 40mm/45mm 950Nm
ATA45 45mm/50mm/55mm 1400Nm
ATA50 50mm/55mm/60mm 2300Nm
ATA60 60mm/70mm 3600Nm
ATA70 70mm/85mm 5100Nm
ATA80 80mm/100mm 7000Nm
ATA100 100mm/125mm 11000Nm
ATA125 125mm/135mm 17000Nm

Certifications

Packaging & Shipping

Packaging & Delivery
ATA series gear reducer Packaging Details:Plastic Bags, Cartons, Wooden Boxes
Port:ZheJiang /HangZhou
 

Company Profile

Our Advantages

Our Services:

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ

If you have any demand for our products please feel free to contact me

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery
Function: Speed Changing, Speed Reduction
Layout: Parallel
Hardness: Hardened
Installation: Torque Arm Type
Step: Single-Step
Customization:
Available

|

Customized Request

gearbox

Different Types of Gearboxes and Their Applications

There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:

  • Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
  • Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
  • Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
  • Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
  • Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
  • Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
  • Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.

Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.

China supplier Shaft Mounted Speed Reducer ATA Series Gearbox   gearbox assembly	China supplier Shaft Mounted Speed Reducer ATA Series Gearbox   gearbox assembly
editor by CX 2024-01-08

China Professional CZPT Planetary Harmonic Drive Cycloidal Gear Reducer Variable Speed Gearbox automatic gearbox

Product Description

GRH specialized in providing hydraulic components and solutions for hydraulic systems.
With continuous improvement and enthusiasm over the past 30 years, CHINAMFG has developed into an emerging power in the fluid power industry since it was established in 1986.

GRH (ZheJiang )  – International Sales Office
GRH (ZheJiang )  –  Manufacturing Facility and Domestic Sales Office
 —————————————————————————————————————————————————   

Production description
 

We can produce motor according to your needs !

 About Us

 Application and Partners

Contact us!

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Expansion
Gear Shape: Conical – Cylindrical Gear
Step: Stepless
Samples:
US$ 1050/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

gearbox

Steps to Replace a Faulty Gearbox in an Automobile

Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:

  1. Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
  2. Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
  3. Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
  4. Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
  5. Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
  6. Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
  7. Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
  8. Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
  9. Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
  10. Lower Engine: Carefully lower the engine back into its original position if it was suspended.
  11. Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
  12. Final Check: Double-check all connections and ensure that all components are properly secured.
  13. Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
  14. Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.

It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.

China Professional CZPT Planetary Harmonic Drive Cycloidal Gear Reducer Variable Speed Gearbox   automatic gearbox	China Professional CZPT Planetary Harmonic Drive Cycloidal Gear Reducer Variable Speed Gearbox   automatic gearbox
editor by CX 2023-11-29

China manufacturer Wpdo 70 Worm Gearbox Speed Reducer with Best Sales

Product Description

WPDO speed reducer,; worm gear box

Rated Power 0.;37~0.;75kw
Output Speed 23~140rpm
Output Torque 19-2745n.;M
Ratio 1&sol;10~1&sol;60

Model NO.;:; WP series                       Manufacturing Method:; Cast Gear
Toothed Portion Shape:; Spur Gear          Type:; Worm and Wormwheel
Gearing Arrangement:; Worm                 Output Torque:; 19-2745n.;M
Rated Power:; 0.;37~0.;75kw                   Input Speed:; 1400
Output Speed:; 23~140rpm                   Place of Origin:; ZHangZhoug,;China
Model Number:; Wpdo                        Brand Name:; EED
Color:; Green,;Yellow or According to Custom  Extra Service:; OEM Welcome&excl;&excl;&excl;
Specification:; SGS,; ISO9001                 Origin:; ZHangZhoug,; China
HS Code:;                      Worm gear box

1.; Widely used in turbines,; shaft liners and axletrees,; good resistance to wearing,; with high precision in dimensions,; lower noise,; advanced centric running castings
2.; Without vent and highly precision
3.; The whole structure is compact and the weight is larger

1.; Notice of installation

1.;1 Thebase-plate must be plane and stoutness,; and the base-plate must be screwed downand shockproof.;
1.;2 Theconnecting shaft of prime mover,; reducer and operation device must be coaxialinstallation.;
1.;3 Thediameter tolerance zone of input and output shaft is H6,; the holes of fittings&lpar;such as couplings,; belt-pulley,; sprocket wheel and so on); must properly matethe shaft,; which prevents bearing from breakage because of over-loose mate.;

1.;4 Driverssuch as sprocket wheel and gear must be fitted close to bearings in order toreduce bending stress of hanging shaft.; 1.;5 Whiteassembling motor of WPD reducer,; it is necessary that proper amount of butterapplies to the worm shaft input hole and keyway,; avoiding assembling tootightly and rusting after using for a long time.; 1.;6 WhenOrdering or using all kinds of WPD type,; if the motor weight is binger than thecommon,; supporting set is required.;

2.; Notices of usage

2.;1 Before using,; please check carefully whether the reducer model,; distance,; ratio,; input connecting method,; output shaft structure,; input and output shaftdirection and revolving direction accord with requirement.;

2.;2 According to the requirement of selecting lubricant oil in the productmanual,; please fill proper category and brand lubricant.; And then screw on thevent-plug&semi; Unlock the small cone-plug of vent-plug.; Only after doing these,; reducer is already for starting up running.; The proper brand and adequatelubricant oil is required,; replacing oil in time conforming to the request ofproduct manual is also necessary,; especially after using first 100 hours,; it isrequired refilling new oil.;

2.;3 Whenabnormal circumstances occur,; please stop and check reducer per solutions andreasons for faults of reducer &lpar;allowable highest oil temperature is 95,; under this temperature limit,; ifoil temperature no more goes up,; please let reducer continue running);
 

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Single-Step
Customization:
Available

|

Customized Request

gearbox

What Is a Gearbox?

There are several factors to consider when choosing a gearbox. Backlash, for example, is a consideration, as it is the angle at which the output shaft can rotate without the input shaft moving. While this isn’t necessary in applications without load reversals, it is important for precision applications involving load reversals. Examples of these applications include automation and robotics. If backlash is a concern, you may want to look at other factors, such as the number of teeth in each gear.

Function of a gearbox

A gearbox is a mechanical unit that consists of a chain or set of gears. The gears are mounted on a shaft and are supported by rolling element bearings. These devices alter the speed or torque of the machine they are used in. Gearboxes can be used for a wide variety of applications. Here are some examples of how gearboxes function. Read on to discover more about the gears that make up a gearbox.
Regardless of the type of transmission, most gearboxes are equipped with a secondary gear and a primary one. While the gear ratios are the same for both the primary and secondary transmission, the gearboxes may differ in size and efficiency. High-performance racing cars typically employ a gearbox with two green and one blue gear. Gearboxes are often mounted in the front or rear of the engine.
The primary function of a gearbox is to transfer torque from one shaft to another. The ratio of the driving gear’s teeth to the receiving member determines how much torque is transmitted. A large gear ratio will cause the main shaft to revolve at a slower speed and have a high torque compared to its counter shaft. Conversely, a low gear ratio will allow the vehicle to turn at a lower speed and produce a lower torque.
A conventional gearbox has input and output gears. The countershaft is connected to a universal shaft. The input and output gears are arranged to match the speed and torque of each other. The gear ratio determines how fast a car can go and how much torque it can generate. Most conventional transmissions use four gear ratios, with one reverse gear. Some have two shafts and three inputs. However, if the gear ratios are high, the engine will experience a loss of torque.
In the study of gearbox performance, a large amount of data has been collected. A highly ambitious segmentation process has yielded nearly 20,000 feature vectors. These results are the most detailed and comprehensive of all the available data. This research has a dual curse – the first is the large volume of data collected for the purpose of characterization, while the second is the high dimensionality. The latter is a complication that arises when the experimental gearbox is not designed to perform well.
gearbox

Bzvacklash

The main function of a gearhead is to multiply a moment of force and create a mechanical advantage. However, backlash can cause a variety of issues for the system, including impaired positioning accuracy and lowered overall performance. A zero backlash gearbox can eliminate motion losses caused by backlash and improve overall system performance. Here are some common problems associated with backlash in gearheads and how to fix them. After you understand how to fix gearbox backlash, you’ll be able to design a machine that meets your requirements.
To reduce gearbox backlash, many designers try to decrease the center distance of the gears. This eliminates space for lubrication and promotes excessive tooth mesh, which leads to premature mesh failure. To minimize gearbox backlash, a gear manufacturer may separate the two parts of the gear and adjust the mesh center distance between them. To do this, rotate one gear with respect to the fixed gear, while adjusting the other gear’s effective tooth thickness.
Several manufacturing processes may introduce errors, and reducing tooth thickness will minimize this error. Gears with bevel teeth are a prime example of this. This type of gear features a small number of teeth in comparison to its mating gear. In addition to reducing tooth thickness, bevel gears also reduce backlash. While bevel gears have fewer teeth than their mating gear, all of their backlash allowance is applied to the larger gear.
A gear’s backlash can affect the efficiency of a gearbox. In an ideal gear, the backlash is zero. But if there is too much, backlash can cause damage to the gears and cause it to malfunction. Therefore, the goal of gearbox backlash is to minimize this problem. However, this may require the use of a micrometer. To determine how much gearbox backlash you need, you can use a dial gauge or feeler gauge.
If you’ve been looking for a way to reduce backlash, a gearbox’s backlash may be the answer. However, backlash is not a revolt against the manufacturer. It is an error in motion that occurs naturally in gear systems that change direction. If it is left unaccounted for, it can lead to major gear degradation and even compromise the entire system. In this article, we’ll explain how backlash affects gears and how it affects the performance of a gearbox.

Design

The design of gearboxes consists of a variety of factors, including the type of material used, power requirements, speed and reduction ratio, and the application for which the unit is intended. The process of designing a gearbox usually begins with a description of the machine or gearbox and its intended use. Other key parameters to consider during gearbox design include the size and weight of the gear, its overall gear ratio and number of reductions, as well as the lubrication methods used.
During the design process, the customer and supplier will participate in various design reviews. These include concept or initial design review, manufacturing design validation, critical design review, and final design review. The customer may also initiate the process by initiating a DFMEA. After receiving the initial design approval, the design will go through several iterations before the finalized design is frozen. In some cases, the customer will require a DFMEA of the gearbox.
The speed increaser gearboxes also require special design considerations. These gearboxes typically operate at high speeds, causing problems with gear dynamics. Furthermore, the high speeds of the unit increase frictional and drag forces. A proper design of this component should minimize the effect of these forces. To solve these problems, a gearbox should incorporate a brake system. In some cases, an external force may also increase frictional forces.
Various types of gear arrangements are used in gearboxes. The design of the teeth of the gears plays a significant role in defining the type of gear arrangement in the gearbox. Spur gear is an example of a gear arrangement, which has teeth that run parallel to the axis of rotation. These gears offer high gear ratios and are often used in multiple stages. So, it is possible to create a gearbox that meets the needs of your application.
The design of gearboxes is the most complex process in the engineering process. These complex devices are made of multiple types of gears and are mounted on shafts. They are supported by rolling element bearings and are used for a variety of applications. In general, a gearbox is used to reduce speed and torque and change direction. Gearboxes are commonly used in motor vehicles, but can also be found in pedal bicycles and fixed machines.
gearbox

Manufacturers

There are several major segments in the gearbox market, including industrial, mining, and automotive. Gearbox manufacturers are required to understand the application and user industries to design a gearbox that meets their specific requirements. Basic knowledge of metallurgy is necessary. Multinational companies also provide gearbox solutions for the power generation industry, shipping industry, and automotive industries. To make their products more competitive, they need to focus on product innovation, geographical expansion, and customer retention.
The CZPT Group started as a small company in 1976. Since then, it has become a global reference in mechanical transmissions. Its production range includes gears, reduction gearboxes, and geared motors. The company was the first in Italy to achieve ISO certification, and it continues to grow into one of the world’s leading manufacturers of production gearboxes. As the industry evolves, CZPT focuses on research and development to create better products.
The agriculture industry uses gearboxes to implement a variety of processes. They are used in tractors, pumps, and agricultural machinery. The automotive industry uses gears in automobiles, but they are also found in mining and tea processing machinery. Industrial gearboxes also play an important role in feed and speed drives. The gearbox industry has a diverse portfolio of manufacturers and suppliers. Here are some examples of gearboxes:
Gearboxes are complex pieces of equipment. They must be used properly to optimize efficiency and extend their lifespan. Manufacturers employ advanced technology and strict quality control processes to ensure their products meet the highest standards. In addition to manufacturing precision and reliability, gearbox manufacturers ensure that their products are safe for use in the production of industrial machinery. They are also used in office machines and medical equipment. However, the automotive gearbox market is becoming increasingly competitive.

China manufacturer Wpdo 70 Worm Gearbox Speed Reducer   with Best Sales China manufacturer Wpdo 70 Worm Gearbox Speed Reducer   with Best Sales
editor by CX 2023-07-12

China supplier Wpdo 70 Worm Gearbox Speed Reducer gearbox drive shaft

Product Description

WPDO speed reducer,; worm gear box

Rated Power 0.;37~0.;75kw
Output Speed 23~140rpm
Output Torque 19-2745n.;M
Ratio 1&sol;10~1&sol;60

Model NO.;:; WP series                       Manufacturing Method:; Cast Gear
Toothed Portion Shape:; Spur Gear          Type:; Worm and Wormwheel
Gearing Arrangement:; Worm                 Output Torque:; 19-2745n.;M
Rated Power:; 0.;37~0.;75kw                   Input Speed:; 1400
Output Speed:; 23~140rpm                   Place of Origin:; ZHangZhoug,;China
Model Number:; Wpdo                        Brand Name:; EED
Color:; Green,;Yellow or According to Custom  Extra Service:; OEM Welcome&excl;&excl;&excl;
Specification:; SGS,; ISO9001                 Origin:; ZHangZhoug,; China
HS Code:;                      Worm gear box

1.; Widely used in turbines,; shaft liners and axletrees,; good resistance to wearing,; with high precision in dimensions,; lower noise,; advanced centric running castings
2.; Without vent and highly precision
3.; The whole structure is compact and the weight is larger

1.; Notice of installation

1.;1 Thebase-plate must be plane and stoutness,; and the base-plate must be screwed downand shockproof.;
1.;2 Theconnecting shaft of prime mover,; reducer and operation device must be coaxialinstallation.;
1.;3 Thediameter tolerance zone of input and output shaft is H6,; the holes of fittings&lpar;such as couplings,; belt-pulley,; sprocket wheel and so on); must properly matethe shaft,; which prevents bearing from breakage because of over-loose mate.;

1.;4 Driverssuch as sprocket wheel and gear must be fitted close to bearings in order toreduce bending stress of hanging shaft.; 1.;5 Whiteassembling motor of WPD reducer,; it is necessary that proper amount of butterapplies to the worm shaft input hole and keyway,; avoiding assembling tootightly and rusting after using for a long time.; 1.;6 WhenOrdering or using all kinds of WPD type,; if the motor weight is binger than thecommon,; supporting set is required.;

2.; Notices of usage

2.;1 Before using,; please check carefully whether the reducer model,; distance,; ratio,; input connecting method,; output shaft structure,; input and output shaftdirection and revolving direction accord with requirement.;

2.;2 According to the requirement of selecting lubricant oil in the productmanual,; please fill proper category and brand lubricant.; And then screw on thevent-plug&semi; Unlock the small cone-plug of vent-plug.; Only after doing these,; reducer is already for starting up running.; The proper brand and adequatelubricant oil is required,; replacing oil in time conforming to the request ofproduct manual is also necessary,; especially after using first 100 hours,; it isrequired refilling new oil.;

2.;3 Whenabnormal circumstances occur,; please stop and check reducer per solutions andreasons for faults of reducer &lpar;allowable highest oil temperature is 95,; under this temperature limit,; ifoil temperature no more goes up,; please let reducer continue running);
 

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Single-Step
Customization:
Available

|

Customized Request

gearbox

Types of Gearboxes Used in Wind Turbines

Many manufacturers of wind turbines have chosen different solutions for the drive train of the turbines. Most prefer gearboxes because of their durability. These have several design features that make them well suited to shocks, stresses and wear. Regardless of the type of gearbox used, continuous maintenance and monitoring can extend the lifespan of these machines. Performing these tasks regularly can help detect and resolve any problems before they become serious. Here are some of the problems associated with gearboxes.

Coaxial helical gearbox

The R series helical inline gearbox is a high-quality speed reducer for heavy-duty industrial applications. These units are designed with increased power density in mind and are equipped with various cooling options. High-grade seals and lubricants help to increase efficiency and minimize thermal loading. They are ATEX-compliant. Their reversible modules are an excellent choice for high-speed applications, such as compressors, compressor blowers, and pumps.
The normal module set of helical gearbox is manufactured using the same tooth-cutting techniques as spur gears. This allows the production of higher-quality, more economical, and more compact helical gears. Although the performance of helical gears is lower than spur gears, they are durable and capable of transferring motion and power between two shafts. And because they are able to handle a much greater load, they are preferred for heavy-duty applications.
The main tooth form of a helical gearbox presents fixed velocity ratios, even if the center gap is not completely set. This requirement is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to a set of paper spur gears, with the exception that the sections must stagger in opposite directions. There are two kinds of helical gears for parallel shafts: left-handed and right-handed.
The Industrial Gearbox market is segmented based on product type, application, and geography. The report analyzes the competitive scenario by segmenting the market by region, company, and type. Using this information, it estimates market size, revenue, and consumption. The report also features key information about COVID-19 and its impact on the overall industry. And it also provides a competitive landscape with industry-leading players.
Industrial gearboxes are integrated with devices and make automation processes more efficient and reliable. Increasing labor costs, shortage of skilled labor, and the ageing workforce are driving the demand for automation technologies. The industry requires newer and more advanced models and technologies to compete in the global market. You can use Coaxial helical gearbox in a variety of applications. Its benefits are endless. If you are looking for a reliable, high-performance industrial gearbox, CZPT can help you find it.
gearbox

Worm reduction gearbox

As a general rule, larger center distance worm reduction gearboxes are more efficient than smaller ones. Worm gearboxes with 2.6-in. center distances start to lose efficiency as their ratios increase. Larger center distances tend to have higher efficiency than smaller ones. However, this difference may not always be enough to justify the higher investment. Worm gear reducers typically cost less than equivalent helical units.
The use of aluminum for worm reduction gearboxes is a popular choice for those involved in the manufacturing of Packaging Equipment. In addition to being lightweight, aluminum worm reduction gearboxes have high strength and rigidity. Manufacturers recommend this choice because of its high rigidity and durability. While purchasing aluminum worm reduction gearboxes, keep in mind that they are more expensive than steel versions. However, they have a longer lifespan and are highly resistant to wear.
The worm’s helix angle is larger than a helical gear, which allows a much higher gear ratio. In addition, the worm’s body is usually longer in the axial direction than helical gears. Worm reduction gears are often left-handed, and British or Indian standards are usually followed. The worm wheel is made of hardened alloy steel PB2-C, while the gearbox case is made of hardened alloy steel FG 220 or FG 250res.
The worms in a sacrificial system are relatively safe from wear. Instead, the softer wheel is the cause of most wear and tear. The oil analysis report for a sacrificial system shows low iron levels and high copper concentrations. However, if a worm reduction gearbox has a bad reputation, you should consider purchasing a new one. If the worm gears are in good condition, the gearbox is still a viable option for a new or replacement vehicle.
The advantages of a worm reduction gearbox are numerous. The worm gearbox is widely used in industrial settings, where it provides torque and speed reduction to move products. Worm gearboxes are also commonly used in automatic security gates, which will not run in reverse. Most security gates use two separate worm drives to keep the gate in the closed position. There are also many other uses for worm reducers. You can learn more about the benefits of worm gearboxes by reading below.

Stainless steel gearbox

Stainless steel gearboxes offer a number of advantages over standard gearboxes. They match the existing stainless motor design and cost 50 percent more on average. They have stainless output shafts and housings as well as corrosion resistant hardware and a food grade lubricant. Stainless steel gearboxes feature IP 65 sealing, Viton shaft seals at the input and output shafts, and a Buna o-ring between the housings. Stainless steel gearboxes also eliminate flat surfaces and allow for a cylindrical design.
Stainless steel gearboxes are more durable than traditional cast iron or epoxy-painted gearboxes. These gearboxes can withstand repeated washdown operations without damage. They also do not collect particles or bacteria. And because stainless steel does not corrode, stainless steel gearboxes can withstand harsh environments, such as oily or greasy environments. Because stainless steel gearboxes are corrosion-resistant, they require little maintenance. They are also easier to clean and maintain, resulting in fewer replacements and a longer life span for your gearbox.
Stainless steel gearboxes are a great choice for food and other industries that require high hygiene standards. In addition to its durability, stainless steel gearboxes are ideal for applications in environments that require high levels of humidity and water. They are also life-lubricated, and they can be supplied with food-grade oils or water. The CZPT Gears stainless gearbox is a versatile option for a variety of applications.
Stainless steel gearboxes offer superior corrosion protection and can withstand harsh environments. The stainless steel cover, housing, and external hardware ensure superior corrosion protection. If you have questions about the varying benefits of stainless steel gearboxes, contact a CZPT Gear sales representative to learn more about your options. And if you are not sure which type is right for your needs, contact a CZPT Gear sales representative to find the perfect solution for your business.
gearbox

1 speed gearbox

Volkswagen Group Components manufactures the one speed gearbox. The gearbox has a high-performance electric drive motor that produces 310 Nm of torque over a wide speed range. Designed for maximum range, this gearbox uses a single gear for all driving situations. It is extremely quiet, too, and requires precision manufacturing. Volkswagen has also made it available in a reverse-gear configuration with power electronics. Volkswagen’s ID.3 EV’s e-drive motor is a perfect example of this.
The first part of the transmission corresponds to the even and odd gears, while the second part has the straighter gears. A single gear set can change between both modes. An intermediate gear set is also possible. A lastshelf gear can be formed by hydraulically betigte Lamellenkupplungen. Both types of gears can be exchanged between partial transmissions. The invention may furthermore include a transmission with the same gear ratios as the first part of the transmission.
Another variation of the one speed gearbox is the CVT. This type of gearbox has only one drive unit, which means it does not require a clutch or brake. Its power is derived from the torque generated by the Internal Combustion Engine at a particular speed. The engine cannot sustain such high torque levels above 5500 RPM, which will reduce the MPG. Also, raising the RPM will reduce the acceleration, and in severe cases may lead to an engine crash.
As the number of applications for a 1 speed gearbox increases, its design and functionality will continue to evolve. Bosch Rexroth has developed its eGFZ gearbox based on customer feedback. They are currently working on various pilot projects and hope to put it into production in the next few years. However, if you want to buy a 1 speed gearbox now, consider the benefits of a first-rate design.

China supplier Wpdo 70 Worm Gearbox Speed Reducer   gearbox drive shaft	China supplier Wpdo 70 Worm Gearbox Speed Reducer   gearbox drive shaft
editor by CX 2023-07-11