China SA Series Helical Worm Gearbox with 1.5kw Explosion Proof Motor with Hot selling

Solution Description

SA Collection Helical Worm Gearbox with 1.5kw Explosion Evidence Motor

 

Enter Configurations

Immediate motor coupled

With IEC B5/B14 motor flange

With IEC B5/B14 motor mounted

With sound enter shaft

Output Configurations

 

Reliable output shaft

Sound output shaft with flange

Hollow output shaft

Hollow output shaft with flange

Variants of the Helical Worm Equipment Device Sequence S / SF / SA / SAF

Foot- or flange-mounted

B5 or B14 flange-mounted

Strong shaft or hollow shaft

Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

 

Complex Data:

Housing content Cast iron/Ductile iron
Housing hardness HBS190-240
Equipment materials 20CrMnTi alloy steel
Surface area hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input / Output shaft substance 42CrMo alloy steel
Input / Output shaft hardness HRC25~30
Machining precision of gears exact grinding, 6~5 Quality
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment method tempering, cementiting, quenching, and so forth.
Performance ninety four%~ninety six% (is dependent on the transmission phase)
Sounds (MAX) sixty~68dB
Temp. increase (MAX) 40°C
Temp. increase (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Model of bearings China best model bearing, HRB/LYC/ZWZ/C&U. Or other brand names requested, NSK.
Model of oil seal NAK — ZheJiang or other makes asked for

Characteristics

Large modular design, flexible mounting method.
Built-in casting housing,compact dimension, secure transmitting and reduced noise stage.
Ideal oil leakage stopping makes the good sealings and can be utilised in vast range of market.
Sophisticated equipment grinding and modified profile, high loading support and a lot more risk-free operation.
Substantial effectiveness and help save electrical power.
Preserve price and minimal maintenance.

Specification

Product

Shaft Dia.

mm

Horizontal Centre Top mm

Exterior Flange Dia.

 mm

Electrical power

(kw)

Ratio

(i)

Nominal Torque

(Nm)

Sound Shaft

Hollow Shaft

S/SF/SA/SAF37

ф20

ф20

88

 

.12-.55

24-204

one hundred

S/SF/SA/SAF47

ф25

ф30 / ф25

100

160

.eighteen-.seventy five

24-204

150

S/SF/SA/SAF57

ф30

ф35 / ф30

112

two hundred

.seventy five-1.5

24-204

250

S/SF/SA/SAF67

ф35

ф45 /ф40

one hundred forty

two hundred

.75-3

24-285

460

S/SF/SA/SAF77

ф45

ф60 / ф50

one hundred eighty

250

.75-7.five

24-385

1200

S/SF/SA/SAF87

ф60

ф70 / ф60

225

350

one.1-11

24-389

2000

S/SF/SA/SAF97

ф70

ф90 / ф70

280

450

1.5-18.5

24-389

3500

Firm profile

Circumstance

Packing

FAQ

Q1: I want to purchase your merchandise, how can I pay out?
A: You can shell out by means of T/T(thirty%+70%), L/C ,D/P and so on. 

Q2: How can you promise the top quality?
A: One year’s warranty in opposition to B/L day. If you satisfy with top quality problem, make sure you send us photographs or movie to check out, we guarantee to deliver spare parts or new merchandise to change. Our assure not contain inappropriate procedure or mistaken specification selection. 

Q3: How we select types and technical specs?
A: You can e-mail us the collection code (for illustration: RC sequence helical gearbox) as properly as necessity details, this sort of as motor power,output pace or ratio, services aspect or your software…as significantly info as possible. If you can source some pictures or drawings,it is nice. 

Q4: If we don’t locate what we want on your website, what ought to we do?
A: We provide 3 possibilities:
one, You can e-mail us the photos, drawings or descriptions information. We will try to style your items on the basis of our
common versions.
two, Our R&D division is specialist for OEM/ODM items by drawing/samples, you can send us samples, we do customized design for your bulk purchasing.
three, We can develop new merchandise if they have excellent industry. We have presently created many things for specific employing productive, such as specific gearbox for agitator, cement conveyor, shoes equipment and so on. 

Q5: Can we get 1 computer of each and every merchandise for quality testing?
A: Sure, we are happy to acknowledge trial buy for high quality testing.

Q6: How about your merchandise supply time?
A: Generally for 20’container, it will take twenty five-thirty workdays for RV sequence worm gearbox, 35-forty workdays for helical gearmotors.

US $80-200
/ Piece
|
2 Pieces

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: M1-M6
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step

###

Customization:

###

Input Configurations
Direct motor coupled
With IEC B5/B14 motor flange
With IEC B5/B14 motor mounted
With solid input shaft
Output Configurations
 
Solid output shaft
Solid output shaft with flange
Hollow output shaft
Hollow output shaft with flange
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

###

Housing material Cast iron/Ductile iron
Housing hardness HBS190-240
Gear material 20CrMnTi alloy steel
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input / Output shaft material 42CrMo alloy steel
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage)
Noise (MAX) 60~68dB
Temp. rise (MAX) 40°C
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, NSK.
Brand of oil seal NAK — Taiwan or other brands requested

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
S/SF/SA/SAF37
ф20
ф20
88
 
0.12-0.55
24-204
100
S/SF/SA/SAF47
ф25
ф30 / ф25
100
160
0.18-0.75
24-204
150
S/SF/SA/SAF57
ф30
ф35 / ф30
112
200
0.75-1.5
24-204
250
S/SF/SA/SAF67
ф35
ф45 /ф40
140
200
0.75-3
24-285
460
S/SF/SA/SAF77
ф45
ф60 / ф50
180
250
0.75-7.5
24-385
1200
S/SF/SA/SAF87
ф60
ф70 / ф60
225
350
1.1-11
24-389
2000
S/SF/SA/SAF97
ф70
ф90 / ф70
280
450
1.5-18.5
24-389
3500
US $80-200
/ Piece
|
2 Pieces

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: M1-M6
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Double-Step

###

Customization:

###

Input Configurations
Direct motor coupled
With IEC B5/B14 motor flange
With IEC B5/B14 motor mounted
With solid input shaft
Output Configurations
 
Solid output shaft
Solid output shaft with flange
Hollow output shaft
Hollow output shaft with flange
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid shaft or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm

###

Housing material Cast iron/Ductile iron
Housing hardness HBS190-240
Gear material 20CrMnTi alloy steel
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input / Output shaft material 42CrMo alloy steel
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~5 Grade
Lubricating oil GB L-CKC220-460, Shell Omala220-460
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage)
Noise (MAX) 60~68dB
Temp. rise (MAX) 40°C
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, NSK.
Brand of oil seal NAK — Taiwan or other brands requested

###

Model
Shaft Dia.
mm
Horizontal Center Height mm
External Flange Dia.
 mm
Power
(kw)
Ratio
(i)
Nominal Torque
(Nm)
Solid Shaft
Hollow Shaft
S/SF/SA/SAF37
ф20
ф20
88
 
0.12-0.55
24-204
100
S/SF/SA/SAF47
ф25
ф30 / ф25
100
160
0.18-0.75
24-204
150
S/SF/SA/SAF57
ф30
ф35 / ф30
112
200
0.75-1.5
24-204
250
S/SF/SA/SAF67
ф35
ф45 /ф40
140
200
0.75-3
24-285
460
S/SF/SA/SAF77
ф45
ф60 / ф50
180
250
0.75-7.5
24-385
1200
S/SF/SA/SAF87
ф60
ф70 / ф60
225
350
1.1-11
24-389
2000
S/SF/SA/SAF97
ф70
ф90 / ф70
280
450
1.5-18.5
24-389
3500

Types of Gearboxes Used in Wind Turbines

Many manufacturers of wind turbines have chosen different solutions for the drive train of the turbines. Most prefer gearboxes because of their durability. These have several design features that make them well suited to shocks, stresses and wear. Regardless of the type of gearbox used, continuous maintenance and monitoring can extend the lifespan of these machines. Performing these tasks regularly can help detect and resolve any problems before they become serious. Here are some of the problems associated with gearboxes.
gearbox

Coaxial helical gearbox

The R series helical inline gearbox is a high-quality speed reducer for heavy-duty industrial applications. These units are designed with increased power density in mind and are equipped with various cooling options. High-grade seals and lubricants help to increase efficiency and minimize thermal loading. They are ATEX-compliant. Their reversible modules are an excellent choice for high-speed applications, such as compressors, compressor blowers, and pumps.
The normal module set of helical gearbox is manufactured using the same tooth-cutting techniques as spur gears. This allows the production of higher-quality, more economical, and more compact helical gears. Although the performance of helical gears is lower than spur gears, they are durable and capable of transferring motion and power between two shafts. And because they are able to handle a much greater load, they are preferred for heavy-duty applications.
The main tooth form of a helical gearbox presents fixed velocity ratios, even if the center gap is not completely set. This requirement is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to a set of paper spur gears, with the exception that the sections must stagger in opposite directions. There are two kinds of helical gears for parallel shafts: left-handed and right-handed.
The Industrial Gearbox market is segmented based on product type, application, and geography. The report analyzes the competitive scenario by segmenting the market by region, company, and type. Using this information, it estimates market size, revenue, and consumption. The report also features key information about COVID-19 and its impact on the overall industry. And it also provides a competitive landscape with industry-leading players.
Industrial gearboxes are integrated with devices and make automation processes more efficient and reliable. Increasing labor costs, shortage of skilled labor, and the ageing workforce are driving the demand for automation technologies. The industry requires newer and more advanced models and technologies to compete in the global market. You can use Coaxial helical gearbox in a variety of applications. Its benefits are endless. If you are looking for a reliable, high-performance industrial gearbox, CZPT can help you find it.
gearbox

Worm reduction gearbox

As a general rule, larger center distance worm reduction gearboxes are more efficient than smaller ones. Worm gearboxes with 2.6-in. center distances start to lose efficiency as their ratios increase. Larger center distances tend to have higher efficiency than smaller ones. However, this difference may not always be enough to justify the higher investment. Worm gear reducers typically cost less than equivalent helical units.
The use of aluminum for worm reduction gearboxes is a popular choice for those involved in the manufacturing of Packaging Equipment. In addition to being lightweight, aluminum worm reduction gearboxes have high strength and rigidity. Manufacturers recommend this choice because of its high rigidity and durability. While purchasing aluminum worm reduction gearboxes, keep in mind that they are more expensive than steel versions. However, they have a longer lifespan and are highly resistant to wear.
The worm’s helix angle is larger than a helical gear, which allows a much higher gear ratio. In addition, the worm’s body is usually longer in the axial direction than helical gears. Worm reduction gears are often left-handed, and British or Indian standards are usually followed. The worm wheel is made of hardened alloy steel PB2-C, while the gearbox case is made of hardened alloy steel FG 220 or FG 250res.
The worms in a sacrificial system are relatively safe from wear. Instead, the softer wheel is the cause of most wear and tear. The oil analysis report for a sacrificial system shows low iron levels and high copper concentrations. However, if a worm reduction gearbox has a bad reputation, you should consider purchasing a new one. If the worm gears are in good condition, the gearbox is still a viable option for a new or replacement vehicle.
The advantages of a worm reduction gearbox are numerous. The worm gearbox is widely used in industrial settings, where it provides torque and speed reduction to move products. Worm gearboxes are also commonly used in automatic security gates, which will not run in reverse. Most security gates use two separate worm drives to keep the gate in the closed position. There are also many other uses for worm reducers. You can learn more about the benefits of worm gearboxes by reading below.

Stainless steel gearbox

Stainless steel gearboxes offer a number of advantages over standard gearboxes. They match the existing stainless motor design and cost 50 percent more on average. They have stainless output shafts and housings as well as corrosion resistant hardware and a food grade lubricant. Stainless steel gearboxes feature IP 65 sealing, Viton shaft seals at the input and output shafts, and a Buna o-ring between the housings. Stainless steel gearboxes also eliminate flat surfaces and allow for a cylindrical design.
Stainless steel gearboxes are more durable than traditional cast iron or epoxy-painted gearboxes. These gearboxes can withstand repeated washdown operations without damage. They also do not collect particles or bacteria. And because stainless steel does not corrode, stainless steel gearboxes can withstand harsh environments, such as oily or greasy environments. Because stainless steel gearboxes are corrosion-resistant, they require little maintenance. They are also easier to clean and maintain, resulting in fewer replacements and a longer life span for your gearbox.
Stainless steel gearboxes are a great choice for food and other industries that require high hygiene standards. In addition to its durability, stainless steel gearboxes are ideal for applications in environments that require high levels of humidity and water. They are also life-lubricated, and they can be supplied with food-grade oils or water. The CZPT Gears stainless gearbox is a versatile option for a variety of applications.
Stainless steel gearboxes offer superior corrosion protection and can withstand harsh environments. The stainless steel cover, housing, and external hardware ensure superior corrosion protection. If you have questions about the varying benefits of stainless steel gearboxes, contact a CZPT Gear sales representative to learn more about your options. And if you are not sure which type is right for your needs, contact a CZPT Gear sales representative to find the perfect solution for your business.
gearbox

1 speed gearbox

Volkswagen Group Components manufactures the one speed gearbox. The gearbox has a high-performance electric drive motor that produces 310 Nm of torque over a wide speed range. Designed for maximum range, this gearbox uses a single gear for all driving situations. It is extremely quiet, too, and requires precision manufacturing. Volkswagen has also made it available in a reverse-gear configuration with power electronics. Volkswagen’s ID.3 EV’s e-drive motor is a perfect example of this.
The first part of the transmission corresponds to the even and odd gears, while the second part has the straighter gears. A single gear set can change between both modes. An intermediate gear set is also possible. A lastshelf gear can be formed by hydraulically betigte Lamellenkupplungen. Both types of gears can be exchanged between partial transmissions. The invention may furthermore include a transmission with the same gear ratios as the first part of the transmission.
Another variation of the one speed gearbox is the CVT. This type of gearbox has only one drive unit, which means it does not require a clutch or brake. Its power is derived from the torque generated by the Internal Combustion Engine at a particular speed. The engine cannot sustain such high torque levels above 5500 RPM, which will reduce the MPG. Also, raising the RPM will reduce the acceleration, and in severe cases may lead to an engine crash.
As the number of applications for a 1 speed gearbox increases, its design and functionality will continue to evolve. Bosch Rexroth has developed its eGFZ gearbox based on customer feedback. They are currently working on various pilot projects and hope to put it into production in the next few years. However, if you want to buy a 1 speed gearbox now, consider the benefits of a first-rate design.

China SA Series Helical Worm Gearbox with 1.5kw Explosion Proof Motor     with Hot selling		China SA Series Helical Worm Gearbox with 1.5kw Explosion Proof Motor     with Hot selling
editor by czh 2023-01-14